**碎纸机的工作原理及故障排除** **一、工作原理** 碎纸机是一种用于销毁敏感或机密文件的设备，它通过切削和研磨来达到碎纸效果。其工作原理主要包括以下几个方面： 1. 电力驱动：碎纸机通常由电动机驱动，通过电力转动其内部的刀片进行工作。 2. 切削作用：当启动碎纸机后，内部的刀片高速旋转，纸片进入后，通过与旋转刀片的摩擦、切割，将被处理的纸张破碎。 3. 碎纸类型：根据碎纸方式的不同，分为颗粒型、条状型和细粒型等。颗粒型通常由一排刀片组成，将纸张切削成小块；条状型则由多个切削单元组成，将纸张切割成条状；细粒型则采用多组旋转刀片，将纸张研磨成细小颗粒。 4. 出口与收集：破碎后的纸屑会从机器内部特定的出口排出，并收集在提供的收集箱或袋中。 **二、故障排除** 1. 无法启动：首先检查电源线是否完好无损并已正确连接电源；确认电源开关是否处于开启状态；如果以上都正常，则可能是电机故障，需要请专业人员检修。 2. 纸张堵塞：可能是由于一次放入过多的纸张或纸张不规则造成的。此时应立即关闭机器并断开电源，然后小心地清理卡住的纸张。在清理时请勿使用尖锐物品，以免损坏刀片或机器内部其他部件。

【碎纸机】便携式碎纸机多功能电动碎纸机办公小型家用A4A6纸文件粉新品售价：82.68元 领券价：82.68元 邮费：0.00

3. 碎纸效果不佳：可能是刀片磨损或刀片安装不当造成的。此时应检查刀片是否锋利且安装正确，如需更换刀片，请联系专业人员进行操作。 4. 噪音过大：可能是机器内部积累了过多的灰尘或异物，需要进行清洁；也可能是机器的某些部件松动或损坏，需要请专业人员检查并维修。 5. 纸张不能完全破碎：除了刀片问题外，还可能是机器内部的传动装置出现故障。这时需要请专业人员检查并修复传动装置。 **三、翻译成英文** **Shredder's Working Principle and Troubleshooting** **I. Working Principle** A shredder is a device used to destroy sensitive or confidential documents through cutting and grinding. Its working principle mainly includes the following aspects: 1. Electric Drive: Shredders are usually driven by electric motors, which rotate the internal blades through electricity to work. 2. Cutting Action: When the shredder is started, the internal blades rotate at high speed. When paper enters, it is broken by friction and cutting with the rotating blades. 3. Shredding Types: Depending on the shredding method, there are particle type, strip type, and fine particle type, etc. The particle type is usually composed of a row of blades that cut the paper into small pieces; the strip type is made up of multiple cutting units that cut the paper into strips; the fine particle type uses multiple rotating blades to grind the paper into small particles.

【碎纸机】新款科密碎纸机C-838T电动办公室用家用粉碎机德标5级2*10mm保密售价：2048.00元 领券价：2048元 邮费：0.00

4. Outlet and Collection: The broken paper fragments are discharged from the specific outlet inside the machine and collected in the provided collection box or bag. **II. Troubleshooting** 1. Unable to Start: First check if the power cord is intact and properly connected to the power source; confirm if the power switch is in the on position; if all are normal, it may be a motor issue that requires a professional to inspect. 2. Paper Jam: This may be caused by inserting too many papers or irregularly shaped papers at once. Immediately turn off the machine and disconnect the power source, then carefully remove the jammed paper. Do not use sharp objects to avoid damaging the blades or other internal parts of the machine. 3. Poor Shredding Effect: This may be caused by worn or improperly installed blades. Check if the blades are sharp and installed correctly; if replacement is needed, contact a professional for operation. 4. Excessive Noise: This may be due to excessive dust or foreign objects accumulated inside the machine that need to be cleaned; or some parts may be loose or damaged, requiring a professional to inspect and repair. 5. Paper not fully shredded: Apart from blade issues, it may also be due to a malfunction in the machine's transmission mechanism. At this time, a professional should be called to inspect and repair the transmission mechanism.