碎纸机使用注意事项及日常维护 一、使用注意事项 1. 确保电源安全：在接通电源之前，请确保电源线无破损，电源插座接地良好，防止电击危险。 2. 纸张处理：不要强行投入过大、过厚或难以破碎的纸张，以免损坏机器或引发故障。建议将纸张整齐叠放后逐次投入碎纸机。 3. 清洁和封闭：在使用前要保证工作区域干净整洁，使用后应及时清理机器内部残渣。每次使用完毕后要关闭进纸口和碎纸口，以防止灰尘和其他杂物进入机器内部。 4. 保护手指：操作时请注意保持手指与进纸口保持安全距离，防止手指被夹伤。 5. 噪音和振动：注意听声音变化，如发现异常噪音或振动，应立即切断电源并联系专业人员进行维修。 二、日常维护 1. 定期清洁：定期清理碎纸机内部和外部的灰尘和杂物，保持机器的清洁卫生。 2. 润滑保养：定期对机器的转动部分进行润滑保养，以减少磨损和故障。 3. 检查刀具：定期检查刀具是否锋利，如有需要可进行更换或磨刀。 4. 电源线整理：使用完毕后，应将电源线整理好并妥善存放，避免缠绕或损坏。 5. 存储环境：避免将碎纸机存放在潮湿、高温或阳光直射的地方，以防影响其性能和寿命。 英文翻译如下：

Instructions and Daily Maintenance for Shredder Machine Use I. Usage Precautions 1. Ensure Power Safety: Before connecting to power, ensure that the power cord is intact and the power socket is properly grounded to prevent electric shock hazards. 2. Paper Handling: Do not forcefully feed large, thick, or difficult-to-shred paper into the machine to avoid damaging the machine or causing malfunctions. It is recommended to neatly stack the paper and feed it into the shredder one by one. 3. Cleanliness and Closure: Ensure that the working area is clean and tidy before use, and clean up any residual debris inside the machine after use. After each use, close the paper inlet and shredding outlet to prevent dust and other debris from entering the interior of the machine. 4. Finger Protection: Pay attention to keeping your fingers a safe distance from the paper inlet during operation to prevent finger injuries. 5. Noise and Vibration: Pay attention to sound changes. If you hear abnormal noise or vibration, immediately cut off the power and contact a professional for maintenance. II. Daily Maintenance 1. Regular Cleaning: Regularly clean the interior and exterior of the shredder machine to remove dust and debris, keeping the machine clean and hygienic. 2. Lubrication Maintenance: Regularly lubricate the rotating parts of the machine to reduce wear and malfunctions. 3. Checking Blades: Regularly check if the blades are sharp and replace or sharpen them if necessary. 4. Organizing Power Cords: After use, organize and store the power cord properly to avoid tangling or damage. 5. Storage Environment: Avoid storing the shredder machine in damp, high-temperature, or direct sunlight areas to prevent affecting its performance and lifespan.